Notes: Rust Prevention Technology; Loaded Caliper, Remanufactured; Includes Bracket; Coated. I recommend Bendix import quiet ceramic pads. Be sure to use the proper torque specifications. Step 5 Remove the front wheel lug nuts. Please Read Proposition 65 Warning In The Description.
Remove brake hose from caliper. Remove caliper from caliper anchor bracket. For more information go to. Please Read Proposition 65 Warning In The Description. Step 10 Install the new caliper over the brake pads and rotor. . Put on the new brakes pads and reassemble the caliper.
Step 14 Remove jack stands and lower the vehicle to the ground. Step 12 Repeat for the other side. Set the parking brake and chock the rear wheels. Verify the condition of the floor jack before use. The pinch welds or the frame rails are the two best locations. Read torque the lug nuts to the proper specification. Ensure Proper FitTo confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table.
We make sure that our warehouse part authorities are properly trained to handle and package your order correctly. Verify the manufacturer's recommendations in the repair manual, as rotors do not always need to be resurfaced or replaced. Remove the jack stands and lower the vehicle. Jack up the vehicle and put some jack stands under it. Carefully remove the caliper and caliper bracket.
Remove caliper guide pin bolts. Remove caliper guide pin bolts. Do not rely on the jack to hold the vehicle up while working. Step 8 Support the caliper up and away from the working area. Put the tire and lug nuts back on.
Make sure you do not kink or pinch any brake lines. Attach the caliper to the mounting bracket with the sliding bolts. The order is packed and ready to ship within hours of being placed. Notes: Rust Prevention Technology; Loaded Caliper, Remanufactured; Includes Bracket; Coated. Drive Torque Wrench Supplies: 1.
Step 4 Secure the vehicle with jack stands on both sides for safety before starting any work. Using a tire iron, break loose the front wheel lug nuts but do not remove. Please Read Proposition 65 Warning In The Description. Step 11 Disconnect the brake line from the old caliper. Plug openings in brake caliper and brake hose in order to prevent brake fluid loss and contamination.
Road test the vehicle to verify brake caliper repair. It is recommend that you replace both the rotor and the brake pads at the same time. Reassemble the caliper bracket 6. These calipers deliver a direct fit to replace your stock calipers in a snap. PowerStop Extreme Performance Brake Systems, a team with over 200 years of combined automotive experience, is a world-renowned leader in brake technology and product development. Step 13 Reinstall the front wheels. Attach the brake line to the new caliper using new copper washers.