This includes entering zone definitions, account number, dialer information, master codes, etc. Unauthorized changes or modifications could void the user's authority to operate the equipment. No key entry is allowed. If zone descriptors are not programmed, the respective zone numbers are announced. There is no obligation to buy, and no credit card information is requested. All wireless keys are defaulted to 1 enabled. Complete with a white console, oversized rubber keyboard, and continuously backlit glass display, the 6150 is a perfect fit for any home or office environment.
Technical specifications are also listed, along with a wiring diagram of the panel. The current address is displayed. Mount the case back to a wall or electrical box. Check with your installer for the programmed function of these keys. The factory default values are shown, along with boxes to record any changes.
The keys on the keypads are continuously backlit for convenience. Most Ademco systems operate and program in similar ways, but there are differences depending on the specific model. These keys may be programmed for panic alarms or other special functions such as macros. A removable cover is included that can be used to hide the keyboard at your discretion. . Red Lights when the system is armed. Son fonctionnement est soumis aux conditions suivantes: 1 Cet appareil ne doit pas causer d' interferences nuisibles.
If daisy-chained configuration is required, pig-tail wires together so that only one wire is terminated under the screw. Sounder: 6150: 6160: Voltage: Current: 6150: Piezo-electric fire alarm is loud, pulsing single tone; all Keypads burglary alarm is loud, continuous, dual tone. After downloading your manual, closing the window will bring you right back here. Function keys must be held down for at least 2 seconds to activate an alarm. This is particularly useful if a user loses a wireless key. Most Ademco alarm systems will have at least two manuals available. Also, the zones, user codes, address setup all lives in the control panel and the keypad is just a controlling device.
It will probably be tucked away in a closet or laundry room, and may or may not have a locking lid. Supervised by control panel if supported. Even after a system is installed, programmed, and working, the programming guide is necessary when making any future changes to the system. Function keys must be held down for at least 2 seconds to activate an alarm. The keys may be programmed by your installer for panic alarms or other special functions such as macros a frequently used series of key entries. Would appreciate details of how to set the 6150 up and put it into normal operation.
The recorded message will remain in memory until a new message is recorded. The attractive white console blends with any décor and features a contoured, removable door that conceals illuminated soft-touch keys. Repeat for the other side. The 6160 also features a new larger and brighter 32-character display with easy-to-read plain-English status messages. Thanks very much for your reply.
This is everything an alarm technician or do-it-yourselfer would need to install the panel, connect it to power, a phone line, and other alarm devices. Note: A message cannot be recorded during the Exit Delay period. Why not get a few from companies in your area? See the control's instructions for details. User manuals provide instructions on how to arm, disarm, bypass zones, etc. Enter the number of the wireless key transmitter 1-8.
Reattach the keypad to its case back. The keypad's default address is 31. Ademco has been making alarm equipment for a long time, so there are many, many different models. If unable to enter address mode, power up and try again. However, there is no guarantee that interference will not occur in a particular installation.
Colored self-adhesive labels are included. Up to four functions can be programmed on individual keys, with commands activated using a security code. Check with your installer for the programmed function of these keys. Check with your installer for the availability and type of alarm of these panic keys. Operation is subject to the following two conditions: 1 This device may not cause harmful interference 2 This device must accept any interference received, including interference that may cause undesired operation. Wiring information for keypads, zone expanders, and optional modules is also included. Function keys must be held down for at least 2 seconds to activate an alarm; key pairs are activated immediately.
You must power down, power up and start address mode again. Up to 3 faulted zones are announced with their zone descriptors, if programmed. If zone descriptors are not programmed, the respective faulted zone numbers are announced. The function keys include keys for panic alarm activation. This will give you a good idea of what a system would cost to have installed, as well as how much you could save by doing it yourself! This is particularly useful if a user loses a wireless key. Get the inside scoop on from an experienced alarm professional. Before visiting any potential manual source, you should check the model number of your panel.