For more information on ProLiant Energy Efficient Features, please visit:. Close or install the tower bezel, as needed. If you need to review the log files, you can run this utility to gather all the logs in one file. Align the processor installation tool with the socket and install the processor. Do one of the following:oo12. Power requirementsInstallation of this equipment must comply with local and regional electrical regulations governing theinstallation of information technology equipment by licensed electricians. After performing the installation or maintenance procedure, press the rail-release latches and slidethe server back into the rack.
Processor One of the following depending on Model Quad-Core Processors Quad-Core Intel® Xeon® Processor X5460 3. Fan amber RedThe minimum fan requirements are not being met. Slide the access panel forward until it clicks into place, and close the access panel latch. Si tienes la placa base puedes ver los led que se iluminan para saber si le llega alimentación aunque no se encienda. This optionshould only be used by qualified service personnel.
Slide the access panel back about 1. Do one of the following: Close or install the tower bezel, as needed. The stabilizing feet are attached to the rack if it is a single-rack installation. Other utilities are available to monitor real time system state. Power down the server on page 17.
Return the server to an upright position. However, there is no guarantee that interference will not occur in a particularinstallation. Connect the power connectors on the power cable extension to any installed media bay devices. Close the bezel tower model. Select the Typical or Custom disk space option. Close the heatsink locking levers.
Me queda la duda placa o micro? The drive is part of an array that is undergoing capacityexpansion or stripe migration, but a predictive failure alert hasbeen received for this drive. Install the silver shipping screw into the full-height device. Un G5 ya tiene 10 años pero aun es posible adquirir motherboards nuevas nunca usadas , busca bien qué modelo o numero de pieza tiene, en esos casos es mejor comprarlas ya con el procesador incluido. Install the silver shipping screw into the full-height device. All the rack mounting hardware necessary for installing the server into the rack is included with therack or the server. Download and have available an Active Health System log for seven days before the failurewas detected.
Power up the server on page 17. Remove the heatsink protective cover. For more information on the content of each resource, refer to the rack resource kit documentation. Do one of the following: Close or install the tower bezel, as needed. For more information on Factory Express services for your specific server model please contact your sales representative or go to:. Any power interruption during the installation process could prevent proper completion of the installation and prevent the operating system from restarting.
This report provides vital information to assist in identifying faults or conditions that may require attention. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Remove the access panel on page 19. Nothing herein should be construed as constituting an additional warranty. Extend the server from the rack on page 17.
Remove the access panel on page 19. If you select interactive mode, follow the instructions on the screen. Close or install the tower bezel, as needed. Prepare the server for diagnosis1. Connect the data and power cables to the rear of the device.
Remove the access panel on page 19. No action is necessary on your part. SmartStart has been tested on many ProLiant server products,resulting in proven, reliable configurations. An altitude derating of 1°C per 300 m 1. Nothing herein should be construed as constituting an additional warranty. Install the access panel on page 20. Removing a drive may terminate the 1 Hz regularly 1 Hz current operation and cause data loss.