Sears fuel filter. Fuel System Cleaning Service 2019-02-15

Sears fuel filter Rating: 4,8/10 429 reviews

Replacing a Fuel Filter on a Riding Lawn Mower

sears fuel filter

The fuel filter keeps dirt from getting into the carburetor. Remove the old fuel filter and install a new one when you tune up your lawn tractor each year, using a manufacturer-approved. If the filter is installed inside the tank, you will need to drain the tank before you can remove the filter for inspection or replacement. Cut one end of the small fuel line at an angle. Slide the breather hose over the rocker cover fitting and secure the hose with the clamp. Do not proceed until you are confident that you understand all of the steps and are capable of completing the repair.

Next

How to Replace the Fuel Lines on a Leaf Blower

sears fuel filter

Pull out the air box and release it from the carburetor throttle and choke levers. In an effort to reduce the risk, use the proper tools and safety equipment noted in the applicable guide and follow all instructions. Wipe up any spilled fuel. Reconnect the fuel line and secure it with the clamp. Reinstall the bolts in the red chute support bracket.

Next

Shopping Tourism: Shop Internationally at Sears

sears fuel filter

Once you place an order, you or someone you know can pick it up at a Sears store, have it shipped to over 100 countries—whatever is most convenient for you. This step-by-step shows how to remove and replace leaf blower fuel lines. Remove the carburetor from the engine. Remove the screws from the front of the muffler guard cover and pull the guard cover off the muffler. Release the wire control cables from the retainer clip and pull off the muffler shroud. Tug the other end of the small fuel until the filter rests on the bottom of the tank.

Next

Replacing a Fuel Filter on a Riding Lawn Mower

sears fuel filter

Release the hose pinch-off pliers from each side of the fuel filter. Damaged fuel lines restrict gas flow and prevent the engine from starting and running. Position the shop rag under the fuel filter to catch drips. Tug the opposite end of the large fuel line until the grommet touches the side of the tank. Use needle-nose pliers to fish the fuel filter out of the mouth of the tank. .

Next

How to Replace a Riding Lawn Mower Fuel Filter

sears fuel filter

Push the angled end into the tank through the mounting hole far enough that you can grab the end through the mouth opening with needle-nose pliers Pull the small line out the mouth of the tank. The end of the small fuel line is connected to the fuel filter inside the tank. Visit us at: Or call 1-800-437-1673 to speak with a parts specialist. Fuel filter Find riding mower parts at Or click here to schedule an appointment with a repair technician. No gas will flow to the carburetor through a clogged fuel filter, and the snowblower may not start. Remove the old fuel filter and install a new one when you tune up your lawn tractor each year, using a part that fits your model.

Next

How to change a fuel filter in small engines?

sears fuel filter

Release the clamp and pull the fuel line off the fuel filter. Cut one end of the large fuel line at an angle. Reinstall the lower dash and secure it with the fastener. Look up your model to make sure you get the right parts for your mower. Sears International Online Shopping If you are planning to visit the United States, or have friends and family here, shop at Sears to get everything you want—including gifts for yourself or others. Position the carburetor on the side of the engine and reinstall the mounting screws. This step-by-step shows how to replace the fuel filter in a riding lawn mower.

Next

Replacing a Fuel Filter on a Snowblower

sears fuel filter

You can pay for your order in a store or even use an international credit card. Remove the fuel tank from the housing. Remove the front muffler shroud mounting bolts. Fuel lines can clog, crimp or crack. Push the fuel lines onto the proper connections on the carburetor. The fuel filter attaches to the fuel tank and screens out dirt and rust particles from the gasoline.

Next

Lawn & Garden Equipment Engine Fuel Filter

sears fuel filter

Let the starter switch hang by the electrical cord. Pull off the muffler shroud before reinstalling the engine shroud. Pull the spark plug wire off the plug. This video shows how to replace the fuel filter in a riding lawn mower. Visit us at: Or call 1-800-437-1673 to speak with a parts specialist.

Next

Replacing a Fuel Filter on a Riding Lawn Mower

sears fuel filter

Interest will be charged to your account from the purchase date if the purchase balance is not paid in full within the promotional period or if you make a late payment. Push the control rod back into the 4-way control rod receiver and line up the support bracket with the mounting holes. Unscrew the fuel filter from the tank and remove it. Pull the carburetor adapter and air dam off of the engine. The video includes these parts and tools.

Next

Lawn & Garden Equipment Engine Fuel Filter

sears fuel filter

Clamp hose pinch-off pliers onto the fuel line on each side of the fuel filter to block the flow of fuel. Some repairs should only be performed by a qualified technician. Remove the front muffler shroud mounting bolts. Transcript: The first step to replacing the fuel filter is to turn the ignition switch off and remove the key. Fuel filter 530095646 cleans the fuel before it reaches the carburetor. Note: If the fuel line is cracking, replace fuel line to ensure no leaks, fuel line will break down over time due to the elements. Remove the mounting screws and pull the starter switch off the bracket.

Next