Mute The mute function allows you to hear the other party but the other party cannot hear you. Then register each handset individually. The clock needs to be set. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with a standard dual-stud telephone wall mount plate. If you still hear other calls, the problem is probably in the wiring or telephone service. For repair procedures, follow the instructions outlined under the Limited warranty. The handset displays Enter number.
Press or to choose Touch-tone or Pulse. The preset code is 19. See the table on page 61 for battery operating times. Contact your telephone service provider for more information and assistance about using your voicemail service. Changes made to the speed dial entries on one handset apply to all. Phone The handset is on a call. Search for the desired entry in the directory see Review and dial from the directory or Alphabetical search on page 32.
Make sure all handsets are plugged with charged batteries before proceeding. Plug in a different telephone. You can set the code from 00 to 99. In Canada, go to www. Do not use liquid or aerosol cleaners.
When the quiet mode duration expires, the answering system remains on. Number repeated The telephone number you have entered is already stored in the directory. Put in charger The battery is very low. Dial your telephone number from any touch-tone telephone. For best performance, keep the handset in the telephone base or charger when not in use. Use the dialing keys to edit the number.
On when the answering system is answering a call. Select a letter below to display product manuals beginning with that letter. The actual recording time depends on individual message characteristics. Ended You have just ended a call. For example, if Linda Jones calls, her name appears as Linda if this is how you entered it into your directory.
If you do not have this wall mount plate, you can purchase one from many hardware or consumer electronics retailers. Messages remain available for replay until you delete them. Command Description 1 Play all messages. To access a number in the directory: 1. When playback begins, you hear the total number of messages followed by the day and time of the message. These requirements are intended to provide reasonable protection against harmful interference in a residential installation.
Telephone calls are transmitted between the telephone base and the cordless handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. Press or to choose Key tone:On or Key tone:Off. The screen displays Delete all? For optimum daily performance, return the handset to the telephone base or charger after use. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. You can register up to five handsets to the telephone base. Before using this telephone, please read Important safety instructions on page 70 of this manual. To enter the handset menu: 1.
See Telephone base and charger installation on page 2. To activate the energy-saving charging mode: 1. Go to Answering system settings from page 43 to page 48 for instructions to change the answering system settings. The speed dial memory locations are stored in the telephone base and are shared by all handsets. Use the dialing keys to enter the number.
You cannot retrieve deleted messages. Then you can enter one of the following remote commands. Contact deleted A directory entry is deleted. The message number currently playing. The total storage capacity for the announcement, messages and memos is approximately 14 minutes.